1.Are Statistics Saved After A Counter Is Transferred To
Another Username?
- They are saved if goals were configured for the counter.
- Yes, they are saved in full.
- No, they are not saved.
2. Which Username Of Which Access Level Can Grant Guest
Access To A Counter?
- Only a counter owner.
- Usernames with one of the following access levels: representative, owner or username with “access to edit” guest access.
- Only a username with “access to edit” guest access.
- Only a representative.
3. Is It Possible To Grant Access To All Counters That Are
Set For One Username?
- Yes, through the representatives system.
- No, you can only grant separate access to each counter.
- No, to do this you need to contact the support service.
4. Please Choose The Correct Next Step. After Making Changes
To The Counter Code Via Yandex.Metrica’s Settings:
- you must reinstall the counter code on all pages of your website.
- your counter code will automatically be updated on the site.
- you must reinstall the counter code on the main page of your site.
5. In What Ways Can I Receive Notifications About The
Availability Of My Website?
- Email and SMS notifications. This option is only available for Yandex.Direct advertisers.
- Email and SMS notifications.
- Email only.
6. Can I Configure Support For A Desired File Extension For
The “File Downloads” Report?
- Yes, you can use the yaCounterXXXXXX.addFileExtension() method in the counter code.
- Yes, it’s enough to enter the required file formats on the Yandex.Metrica counter editing page.
- No, you cannot if these formats are not in the list of supported file formats.
- Add 2 actions: “Remove parameter – Page URL – “by_size” and “by_price”.
- Add action: “Remove anchor”.
- Add 4 actions: “Remove parameter – Page URL – “order”, “sort”, “by_size” and “by_price”.
- Add 2 actions: “Remove parameter – Page URL – “order” and “sort”.
- Any of the two blocks of code.
- Only the — Yandex.Metrica informer — block.
- Both blocks of code.
- Only the — Yandex.Metrica counter — block.
- User clicks through to any of the specified pages.
- User clicks through to all of the specified pages in any order.
- User clicks through to all of the specified pages in a strict order.
- Sets a goal conversion as a type of JavaScript-event.
- Sends information about page views
- Activates the “Link map” report.
- Specifies the goal name.
- 7
- Unlimited.
- 5
- Clicks on links.
- File downloads.
- Page views.
- User’s session duration.
- JavaScript event.
- Number of page views.
- Multi-step goal.
- ID which will be placed in the reachGoal method on the site.
- URL of the page where there will be a goal conversion.
- Button ID on which a goal conversion is configured.
- This report is only available for owners of online stores.
- This report is only available for owners of online stores that are registered on Yandex.Market.
- This report is available for all Yandex.Metrica users.
- Unique users who come to a site for the first time since the start of data collection.
- Users coming to a site for the first time this year
- Unique users that come to a site in the reporting period.
- Social network traffic.
- Search engine traffic.
- Mailing traffic.
- Link traffic.
- It does not collect this information.
- Yes, it does.
- Only information on downloaded files.
- Only information on click-throughs to external sites.
- Direct traffic.
- Internal traffic.
- Cached page traffic.
- Value of the “Goal ID” field.
- Goal ID.
- Goal name.
- http://mysite.com/?from=yandex
- http://mysite.com/&from=yandex
- http://mysite.com/from=yandex
- A setting in counter settings
- Click-throughs between pages of a site.
- A traffic source.
- Click-throughs by ad.
- Internal traffic.
- Direct traffic.
- Only information on orders from Yandex.Market. Information on the content of an order is collected without any additional settings.
- Only information on orders from Yandex.Market. This requires setting up on the site the transfer of information about the content of an order.
- Information on all orders from any traffic source. This requires setting up on the site the transfer of information about the content of an order.
- Information on all orders from any traffic source. Information on the content of an order is collected without any additional settings.
- Direct traffic.
- Search engine.
- Session will be recorded in both traffic source reports.
- “About the service”.
- “Yandex.Direct”.
- “Getting started”.
- Records only user actions on a site; the page content is not recorded.
- Records user actions and the HTML code of the pages viewed by the user.
- Records a video containing all information.
- Yes, it records all information which a user enters on a site.
- Webvisor does not record information entered into special password fields.
- If a page contains special password fields, Webvisor does not record any user actions in them.
- Informer.
- Conversion rate.
- Webvisor.
- All of the 1500 sessions that it was able to record.
- All sessions of a length longer than 1 second.
- No more than 1000 sessions.
- Keywords.
- Ad systems.
- Yandex.Direct – summary
- Yandex.Direct – sites.
- Webvisor.
- Yandex.Direct – summary.
- Ad systems.
- Yandex.Direct – summary.
- Yandex.Direct – income.
- Yandex.Direct – sites.
- Yandex.Direct – costs.
- Ad systems.
- All reports apart from Webvisor and form analysis reports.
- All reports apart from Target Call and goal reports.
- All reports apart from Webvisor, Keywords, Yandex.Direct and Target Call reports.
- All reports.
- Yes, this option is available to the owner of the counter.
- No, never.
- No, to do this you need to contact the support service.
- Usernames with “access to edit” guest access.
- Usernames that are representatives and counter owner usernames.
- Usernames with “view only” guest access.
- Only the counter owner’s username.
- Any username if “Public access to statistics” is enabled the access settings.
- For the current day.
- For one month from today’s date.
- The informer displays all information from the moment of installation.
- Information will be collected after the counter has been verified by a Yandex.Metrica robot.
- After one hour.
- Immediately.
- Data will not be collected.
- Data will be collected, but getting access to it is only possible after restoring the counter in the Yandex.Metrica interface.
- Data will still be collected in the usual manner.
- View user actions on your site.
- Add a block to your site that displays information about site traffic.
- Get notifications about any problems concerning site availability.
- Multi-step goal.
- Page view.
- Number of page views.
- Full sequence of steps but with visits to other site pages.
- The first step, and then immediately the third step.
- Full sequence of steps in reverse order.
- Second and third step, bypassing the first.
- Multi-step goal.
- Page view.
- Number of page views.
- JavaScript event.
- User completes all steps of a goal in sequence.
- User completes all steps of a goal, but not in order.
- User completes all steps of a goal in sequence, but visited other site pages as well.
- Only the first.
- Only the last.
- Both keywords.
- Goal conversion.
- Ad campaign number.
- Ad number.
- People who, in the reporting period, visit a site for the first time since the start of data collection.
- A Yandex user that goes to a site in the reporting period.
- A user is one that completes at least one session on a site in the reporting period.
- No, you can only find out the usage percentages for mobile and standard devices.
- Yes, you can see telephone models in the “Technology – Devices” report.
- No, in reports you can only see information on device manufacturers.
- 2 converted sessions, with one conversion in each.
- 1 converted session, 1 conversion.
- 1 converted session, 2 conversions.
- Yes, it’s possible. The IDs of additional parameters must be determined earlier in the counter settings.
- Yes, it’s possible with the “Session parameters” option.
- Yes, it’s possible, but only for online stores with the help of e-commerce settings
- Yes, though you can only transfer information about whether a user was signed in on a site.
- No, never.
- Direct traffic.
- Internal traffic.
- Cached page traffic.
- In the “Webvisor” report.
- Information about the full IP addresses of users is available in most reports.
- In the “Traffic” report.
- It is not possible to obtain a user’s full IP address.
- Internal traffic.
- Search engine traffic.
- Referral from site.com.
- Monitoring – Monitoring results.
- Monitoring – Robots.
- Monitoring – Load on site.
- http://www.site.com/cat/
- http://www.site.com/~cat
- http://www.site.com/cat/*
- http://www.site.com/cat/~
- You should configure the counter settings so that Webvisor does not record any information.
- You should mark the input field in the HTML code of the pages with the special CSS- class -metrika-nokeys.
- On such pages you must install the counter code without the “Webvisor” function enabled.
- Enable the “External internet statistics” feature in the Yandex.Direct campaign settings.
- Enter the Yandex.Metrica counter number in the Yandex.Direct campaign settings.
- Enable the “Tagging links for Metrica” feature in the Yandex.Direct campaign settings.
- Counter owner’s username.
- Usernames with “access to edit” guest access.
- Usernames with “view only” guest access.
- Representative username.
- With the “accurateTrackBounce” property.
- With the “defer” property.
- With the “trackHash” property.
- You must install its code on the main page of a site.
- You must install its code on all pages of a site.
- Data on site traffic will be collected immediately – no other actions are required.
- No, but you can add up to 25 IP addresses to the blocked list.
- Yes, in the “Filters” section in the counter settings.
- No, you can only exclude your own traffic.
- Contains.
- Regular expression.
- Does not contain.
- Begins with…
- Matches.
- Both sessions are considered “Direct traffic”.
- The bookmark session is considered “Internal traffic”, while the other session is “Direct traffic”.
- The bookmark session is considered “Cached page traffic”, while the other session is “Direct traffic”.
- Last significant click-through.
- First visit.
- Last visit.
- 14
- 21
- 2
- All pages of a site.
- Several select pages of a site.
- Only the main page of a site
- Traffic made to a website link that is stored locally on a computer.
- User goes to a site from a browser bookmark.
- User goes to a site by entering its address into the browser’s address bar.
- 0.5
- 15%
- 20%
- From the <description> tag.
- From the <title> tag.
- From the <head> tag.
- Data usage increases slightly depending on the page size and the duration of the session.
- No, data usage does not increase.
- Data usage increases significantly because a video is being recorded.
- Sources – Summary.
- Keywords.
- Yandex.Direct – summary.
- The duration of a session, after which the session will be considered complete.
- Sources, which clicking through on will begin a new session, while the old session ends.
- The number of pages viewed, after which the session is considered complete.
- The idling time of a user on a site, after which Yandex.Metrica considers the session complete.
- notBounce().
- hit().
- trackLinks().
- When changing the name of a goal.
- When a goal is deleted.
- When changing conditions in a goal.
- When one of the goal conditions or steps in a multi-step goal is deleted.
- Number of page views.
- JavaScript event.
- Multi-step goal.
- You must specify the Yandex.Metrica counter code number in the VKontakte ad campaign settings.
- You must change the counter code and reinstall the counter on the site.
- You must add UTM or OpenStat tags to the ad URL.
- 1 converted session, 1 conversion.
- 1 converted session, 2 conversions.
- 2 converted sessions, 2 conversions.
- 2 sessions.
- 1 session.
- 3 sessions.
- The number of clicks on “Share” buttons.
- The number of sessions, during which users clicked on “Share” buttons.
- The number of users which clicked on “Share” buttons.
- Direct traffic.
- Internal traffic.
- Search engine traffic.
- Records only user actions on a site; the page content is not recorded.
- Records a video containing all information.
- Records user actions and the HTML code of the pages viewed by the user.
- Maps data.
- Goal conversion data.
- Webvisor data.
- Number of click-throughs on a vCard.
- Key query.
- Number and name of ad campaign.
- Title and ad number.
- The statistics will take into account only sessions for the domains that you listed in the “Website address” field when registering a counter. Sessions for other domains will not be taken into account if they are not listed as additional domain addresses.
- The statistics will take into account sessions for all domains.
- The statistics will take into account only sessions for the domains that you listed in the “Website address” field when registering a counter.
- Yes, you can change it at any moment.
- Yes, by sending a request to the support service.
- Never.
- For XML sites.
- Hash tracking in the browser address bar.
- Asynchronous code.
- URLs of pages viewed.
- Geographic location.
- Adblock presence.
- User’s full IP address.
- For the whole time the site has been functioning, provided that it was advertised on Yandex.
- Webvisor data is kept for 15 days; other information is stored indefinitely.
- There are no restrictions on how long information is kept.
- For last year.
- Share of traffic on this link relative to the same links on other pages.
- Share of traffic relative to other links on the site.
- Share of traffic relative to other links on the page.
- Webvisor data.
- Maps data.
- Goal conversion data.
- Informer type.
- Background color.
- Domains on which the informer should be displayed.
- Text color.
- Yes, you must go into the counter code’s access settings and enable “Public access to statistics”.
- No, it is not possible to provide public access to a counter’s statistics.
- Yes, you must go into the informer settings and enable “Public access to statistics”.
- matches “cart”
- contains “cart”
- contains “/cart”
- No, in the “Technology – Browsers” report there is only information about browsers and not their version.
- Yes, in the “Technology – Browsers” report.
- In the “Technology – Browsers” report there is information on browser versions, except for browsers for mobile devices.
- Yes, it’s possible. Contact the support service.
- Yes, by using counter tags.
- No, never.
- Yes, Yandex.Metrica automatically combines data for several counters if they have the same domain in their settings.
- Tags do not matter. You must install the counter as close as possible to the top of the page.
- <BODY></BODY>.
- <HEAD></HEAD>.
- Include all robot sessions.
- Use strict filter only.
- Use strict filter and behavior.
- 1 session, traffic source – internal traffic.
- 3 sessions, all with the same traffic source – search engine traffic.
- 3 sessions, each with their own traffic source.
- 1 session, traffic source – search engine traffic.
- Yandex.Metrica will collect only general information, but not information on conversions.
- Information will collected correctly.
- The counter will not collect information.
- No, never.
- Yes, in the “Sources – Social networks” report. Information will be collected only in the presence of appropriate tags.
- Yes, in the “Sources – Social networks” report.
- Yes, but all counters must be under one username.
- Yes, you can.
- No, data will be collected incorrectly.
- 102. Which Option Has An Incorrect IP
Interval Specified In The Counter Filters?
- 192.168.*
- 192.168.0.0-192.168.255.255
- 192.168.0.0/24
- 192.168.0.0;192.168.255.255
- A session will be considered a bounce when a users goes to one site page and views it for less than five seconds.
- A session will be considered a bounce when a users goes to one site page and views it for less than fifteen seconds.
- A session will be considered a bounce when a users goes to one site page and views it for less than 5000 seconds.
- Search engine traffic
- Internal traffic.
- Link traffic
- Direct traffic.
- It is always exactly 30 minutes.
- It is exactly 30 minutes if a user did not come to the site via an ad system. Idle time for users that come to a site by an ad system is 60 minutes.
- By default it is exactly 30 minutes. This can be changed in the counter setings under “Visit timeout in minutes”.
- Only click-throughs from Yandex.Direct.
- All ad systems.
- Search engines.
- Clicking through from sites.